CC2530 Zigbee network device lost auto maintain associated

1.Network initial state

2.Move 0xC6C4 out of zigbee network range
   00 : 45  >> 0xC6C4 out of range
   01 : 15  >> 0x2C5C get new short address and parent node

3.Check Coordinator child node and associated

4.Check 0x19B1 parent node,child node,associated

5.Move 0xC6C4 (0x00124B0002017DD6) into zigbee network range

   00 : 25  >> 0x00124B0002017DD6 join the zigbee

6.Check 0x00124B0002017DD6 short address,parent node,associated

7.Check 0x19B1 parent node,child node,associated

CC2530 When the device lost and the net association full how to join the new device to the zigbee net?

1. Define Zigbee Network Architecture

2.Coordinactor info check

3.Sensor Monitor

4.Router 1~4 info check

5.The R3 power down to simulation the device lost and add the R5 to join the network

6.Packet Sniffer to check the R5

7.How does the R5 join to the network?

8.To delete the 0x6B3E association list

9.Check The R5 info

10.Check The 0x6B3E Association List

CC2530 Zigbee Module Development(4) -Source Code Not Release

CC2530 Zigbee Module Development(4)

CMD_RF_BROADCAST_MSG_SEND

Usage

 


Output format

The Coordinator Broadcast Msg / The Router Receiver 

CMD_RF_PEER_TO_PEER_MSG_SEND (Short-Address)

Usage

Output format

The Coordinator Peer to Peer Send Msg / The Router Receiver 

CMD_RF_IEEE_MSG_SEND
Usage

Output format

The End-Device send msg to Router

CMD_GET_RSSI

Usage

Output format

Get RSSI

CMD_NODE_POLL

Usage

Output format

Device Type

Poll Device Short Address to get information

CMD_IEEE_NODE_LEAVE
Usage

Output format

The Coordinator send IEEE node leave to Router

CMD_SHORT_ADDRESS_NODE_LEAVE

Usage

Output format

The Coordinator send Short Address node leave to Router

CC2530 Zigbee Module Development(3) - Source Code Not Release

CC2530 Zigbee Module Development (3) 

CMD_IEEE_ADDRESS

Usage

Output format

Get IEEE Address ( Coordinator )

CMD_SET_PERMIT_JOIN

Usage

Output format

Permit Duration

Set Permit Join ( Check Coordinator Assoc List and Turn Off Permit Join)

Reset the End-Device.The End-Device join the Router (The Coordinator Assoc list only Router)

CMD_ASSOC_LIST

Usage

Output format

Get Assoc List ( Coordinator )

CMD_SET_TRANS_POWER (  Power Level : 0x00 to 0x13 )

Usage

Output format

Set Trans Power

       

CMD_PING_NODE

Usage

Output format

Channel List

Device Type

Ping Node