Development Environment & Peer to Peer Tesing

Development Environment Installation  

1. IAR Embedded Workbench

2. CC-Debug Driver and Update

3. FT232R Driver

4. SmartRF Flash Programmer

Peer to Peer Tesing

1. The TX-Board send the character " a " to the RX-Board every two seconds

2. The RX-Board receive the character " a " and set the character to " b " ( " a "+ 1=" b " )

3. Each time the TX-Board send data and the RX-Board receive data the R-LED will blink

4. Monitored by the UART software Tool

Red-Board is set to TX-Board

Green-Board is set to RX-Board

TX-Board send the character " a "

RX-Board receive the character " a " and set the character to " b "

Video